1pc ER20M type Collet Clamping Nut for CNC Milling Collet Chuck Holder Lathe

Description

1pc ER20M type Collet Clamping Nut for CNC Milling Collet Chuck Holder Lathe
Description:
Condition:
100% Brand New & High Quality
Size:
As Picture
Fitment:
For ER collet milling CNC chuck holder.
Specification:
Model:
ER20M
Material:
Carbon steel
Feature：
Hardened and precision ground.
High strength and hardness.
Durable in use.
Mounting and Removing:
1.Place collet into the clamping nut at an angle and turn the nut slightly to engage with the extractor spiral in collet groove. And then push the collet evenly into the nut in the directions of the arrows.
2.The cutter / router bit may be fitted now and the assemblies tightened hard into the chuck body by using a collet wrench.
3.To remove the cutter / router bit, slacken and undo the nut until resistance is felt. Then, using a collet wrench, further undo the nut until the collet is released from the chuck body. Removal of the collet from the nut is the reverse of the mounting procedure.
Please note:
1、Please don't tighten the nut down before insert the cutter / router bit. Or you will damage the collet.
2、You need to tighten the nut down, but not over-tighten. Or you will damage the collet.
Package Include:
1 x ER20M type Clamping Nut
The item is brand new but it might have some scratches during the transportation. Please understand that.
BBBMT0188
Shipping Policy
▼
Item(s) would be shipped out within 1-2 working days after received your confirmed payment.
▼
We will ship to confirmed Ebay or PayPal addresses. Please make sure your address is correct before place an order.
▼
Please kindly note weekends and holidays are not working days.
▼
Sometimes payment issues, adverse weather and other unusual events can cause a delay to dispatch that is beyond our control. Hope you can understand that.
Payment Policy
▼
Paypal, Visa, and MasterCard are the accepted forms of payment.
Return Policy
▼
30 days return
▼
Return are accepted within 30 days of confirmed delivery.
▼
It is the customers responsibility to pay for return shipping.
▼
Returned items must in original package and not used or damaged.
Feedback
▼
Please email us before leaving any negative feedback or opening any dispute on the site, we will help you to solve the problem.
▼
We care about our valued customers and will always try to help you, and we hope we can cooperate again in the future.
[CROSSSELLING19][CROSSSELLING20][CROSSSELLING21][CROSSSELLING22][CROSSSELLING23][CROSSSELLING24][CROSSSELLING25][CROSSSELLING26][CROSSSELLING27]
On Jul-06-21 at 00:27:43 PDT, seller added the following information: